Large selection of drives – even more powerful and more efficient with new engines
- 14 Pictures
- 2 Documents
Combined fuel consumption 6.6-5.8 l/100 km, CO₂ combined emissions 174-154 g/km *
The facelift coincides with the availability of the four-cylinder 2.0-litre OM 654 diesel engine for all variants of the Mercedes-Benz Vito with rear-wheel drive. It is familiar from the Mercedes-Benz Cars engine portfolio and has been optimised for efficiency and emissions. The new engine generation had previously only been available for the Vito Tourer. Commercial vehicle customers can choose from the following four output categories, exemplary for a Vito panel van:
- The Vito 110 CDI with 75 kW (102 hp) and 270 Nm torque
(combined fuel consumption 6.5-6.4 l/100 km, CO₂ combined emissions 172-169 g/km)* - The Vito 114 CDI with 100 kW (136 hp) and 330 Nm torque
(combined fuel consumption 6.6-5.8 l/100 km, CO₂ combined emissions 173-154 g/km)* - The Vito 116 CDI with 120 kW (163 hp) and 380 Nm torque
(combined fuel consumption 6.4-5.8 l/100 km, CO₂ combined emissions 169-156 g/km)* - The Vito 119 CDI with 140 kW (190 hp) and 440 Nm torque
(combined fuel consumption 6.4-5.8 l/100 km, CO₂ combined emissions 169-154 g/km)*
And – as the new top engine in its class – for the Vito Tourer and the Vito Mixto registered as a passenger car the Vito 124 CDI with 176 kW (239 hp) and 500 Nm torque (combined fuel consumption 6.4-6.3 l/100 km, combined CO₂ emissions 168-166 g/km)*. In the acceleration phase, the Vito 124 CDI only available with passenger car registration can briefly deliver an additional 30 Nm of torque ("overtorque") – in addition to its 500 Nm of torque. The Vito 124 CDI accelerates from 0 to 100 km/h in 7.9 seconds. It can reach a top speed of 210 km/h.
The OM 654 engine generation is even more efficient and cleaner than the OM 651 and additionally offers further improved noise and vibration characteristics. It is pleasantly quiet inside the vehicle and annoying vibrations have been reduced. The combination of aluminium housing and steel pistons, the stepped recess combustion process and the NANOSLIDE® cylinder wall coating for reduced in-engine friction, together with the dynamic multi-way exhaust gas recirculation and the in-engine exhaust gas aftertreatment, facilitates lower consumptions plus low emissions. Due to its near-engine, insulated position, the exhaust gas aftertreatment works with little heat loss and in optimum conditions. Its measures include:
- High and low-pressure exhaust gas recirculation including cooling
- A diesel oxidation catalytic converter (DOC) reduces the carbon monoxide (CO) and unburnt hydrocarbons (HC) emissions
- A particle filter with SCR catalytic converter functionality (sDPF)
- An SCR catalytic converter (Selective Catalytic Reduction) for reducing nitrogen oxides. In this process, ammonia is mixed into the exhaust gas upstream of the sDPF in the form of AdBlue®
- An additional selective catalytic reduction catalytic converter (SCR) with ammonia slip catalytic converter (ASC) in the exhaust gas duct
How efficient these measures are can be seen on the basis of the fuel savings of around 13 percent which the new Vito 119 CDI can boast in comparison with its predecessor model**. The SCR tank's capacity is 24 litres for all models.
Maximum comfort with exemplary efficiency: the 9G-TRONIC automatic transmission
For the first time the 9G-TRONIC automatic transmission is now available without restrictions for all Vito variants with rear wheel drive. The especially comfortable and efficient automatic transmission with torque converter replaces the 7G-TRONIC and was previously reserved for the Vito Tourer. Drivers can use the DYNAMIC SELECT switch to select the drive programs "Comfort" and "Sport" and thus tailor the shifting behaviour to their driving requirements. Alternatively, they can shift manually in "M" mode using DIRECT SELECT steering wheel gearshift paddles.
Unique drive variety
In conjunction with the new OM 654 engine family the Mercedes-Benz Vito is fitted as standard with rear wheel drive – with the option of 4x4 permanent all-wheel drive. This enables it to negotiate a wide range of surfaces with ease. The vehicle height remains under the two-metre mark even when equipped with all-wheel drive. Thus the Vito does not lose any of its day-to-day usability and can still fit in regular garages as well as multi-storey and underground car parks and car washes problem-free.
In addition, as a variant with front wheel drive, the Vito is available with the entry-level engine from the OM 622 family: The compact four-cylinder with a 1.7 l displacement and 75 kW (Vito 110 CDI, combined fuel consumption 6.5-6.4 l/100 km, combined CO₂ emissions 172-169 g/km)* plus 100 kW (Vito 114 CDI, combined fuel consumption 6.5-6.4 l/100 km, combined CO₂ emissions 172-168 g/km)* are installed transversely and combined with a manual six-speed transmission.
The engine range of the new Vito panel van at a glance:
|
|
Vito 110 CDI FWD |
Vito 114 CDI FWD |
Vito 114 CDI RWD |
Vito 114 CDI 4x4 |
Vito 116 CDI RWD |
Vito 116 CDI RWD |
Vito 116 CDI 4x4 |
Vito 119 CDI RWD |
Vito 119 CDI 4x4 |
|
No. of cylinders / arrangement |
4/R |
4/R |
4/R |
4/R |
4/R |
4/R |
4/R |
4/R |
4/R |
|
Displacement (cm3) |
1749 |
1749 |
1951 |
1951 |
1951 |
1951 |
1951 |
1951 |
1951 |
|
Rated output (kW/PS) |
75/102 |
100/136 |
100/136 |
100/136 |
120/163 |
120/163 |
120/163 |
140/190 |
140/190 |
|
Rated torque (Nm) |
270 |
330 |
330 |
330 |
380 |
380 |
380 |
440 |
440 |
|
Transmission |
6-Gang-manuell |
6-Gang-manuell |
9G-TRONIC |
9G-TRONIC |
6-Gang-manuell |
9G-TRONIC |
9G-TRONIC |
9G- TRONIC |
9G-TRONIC |
|
Combined consumption (l/100 km) NEFZ* |
6.5-6.4 |
6.5-6.4 |
6.1-5.8 |
6.6-6.5 |
6.2-5.9 |
6.1-5.8 |
6.4-6.3 |
6.0-5.8 |
6.4-6.3 |
|
Combined CO₂-emission (g/km) NEFZ* |
172-1699 |
172-168 |
160-154 |
173-170 |
162-156 |
160-154 |
169-166 |
157-154 |
169-166 |
|
Emission class |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
The engine range of the new Vito Mixto with commercial registration at a glance:
|
|
Vito 110 CDI FWD |
Vito 114 CDI FWD |
Vito 114 CDI RWD |
Vito 114 CDI 4x4 |
Vito 116 CDI RWD |
Vito 116 CDI RWD |
Vito 116 CDI 4x4 |
Vito 119 CDI RWD |
Vito 119 CDI 4x4 |
|
No. of cylinders / arrangement |
4/R |
4/R |
4/R |
4/R |
4/R |
4/R |
4/R |
4/R |
4/R |
|
Displacement (cm3) |
1749 |
1749 |
1951 |
1951 |
1951 |
1951 |
1951 |
1951 |
1951 |
|
Rated output (kW/PS) |
75/102 |
100/136 |
100/136 |
100/136 |
120/163 |
120/163 |
120/163 |
140/190 |
140/190 |
|
Rated torque (Nm) |
270 |
330 |
330 |
330 |
380 |
380 |
380 |
440 |
440 |
|
Transmission |
6-Gang-manuell |
6-Gang-manuell |
9G-TRONIC |
9G-TRONIC |
6-Gang-manuell |
9G-TRONIC |
9G-TRONIC |
9G- TRONIC |
9G-TRONIC |
|
Combined consumption (l/100 km) NEFZ * |
6.6-6.5 |
6.6-6.5 |
6.0-5.8 |
6.0-5.9 |
6.2-5.9 |
6.0-5.8 |
6.0-5.9 |
5.9-5.8 |
6.0-5.9 |
|
CO₂-Emissionen komb. (g/km) NEFZ * |
174-172 |
174-171 |
157-154 |
157-155 |
162-157 |
157-154 |
157-155 |
154 |
157-155 |
|
Emissionsklasse |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
Euro 6d-TEMP |
Diversity for success
The Vito also demonstrates its diversity in other areas. For instance, it is the only model in its class to be available in a choice of three lengths, two wheelbases and three drive systems. With a payload of up to 1369 kg it is also the giant in its class. The wide diversity of variants make it a partner for a large range of trades: as a panel van it reliably meets all requirements in goods and freight transportation. Almost as frequently it is used as a mobile parts store and service vehicle. The Mercedes-Benz Vito Tourer, on the other hand, predominantly transports people and goods – often also in factory traffic. The Vito Mixto bridges the gap between the panel van and Tourer: it is particularly suitable for mobile tradespeople teams. Last but not least, customers can choose from different equipment packages. For example, the Vito Tourer is available with the Lines BASE, PRO or SELECT.
In view of its use as a commercial vehicle, the optional equipment of the Vito is particularly diverse. There are numerous door and window variants or roof rails with carrier bars. The load compartment can be fitted with a wooden floor, a rail system for load anchoring, lashing rails on the sidewall and interior panelling. These options provide an maximum of functionality. In the panel van a new, optional and hard-wearing lightweight-construction floor made of plastic plays fully to its strengths compared with the standard metal load compartment floor and increases the payload leeway by 12 to 15 kilograms compared with the wooden floor. Roof attachments, carrier systems and load compartment trays are either available ex-factory or as accessories. More comfort and easier handling come courtesy of the rail system in the Vito Tourer, which can be used to move the rear bench seats in the rear effortlessly.
Sportily taut or comfortable: both are possible with AIRMATIC
With the new AIRMATIC the Vito is once again broadening its already wide application spectrum. Because whether it is a bumpy rural road or a perfectly flat motorway: available for the first time in the Vito, eVito, V-Class and EQV (combined power consumption: 26.4-26.3 kWh/100 km; combined CO₂ emissions: 0 g/km)* from October 2020, the air suspension system AIRMATIC adjusts the suspension to the prevailing conditions. Thanks to increased ground clearance the ride comfort is retained even on rough terrain. Damping is regulated for each individual wheel automatically – to suit the current driving situation and the state of the road. This is done rapidly and precisely, using two separate valves for the rebound and compression forces in the dampers. Thus the AIRMATIC provides you with the highest degree of driving comfort for every situation.
Comfort-orientated basic springing turns into safe driving stability with increasing speed. The separate setting of the rebound and compression phase via one valve respectively results in calmer handling. By combining safety and comfort in this ground-breaking way, Mercedes-Benz Vans is assuming a pioneering role in the segment of midsize vans.
Thanks to intuitive operation via the DYNAMIC SELECT switch in the centre console the driver can quickly and easily choose from three different drive programs. One program for raises the vehicle by up to 35 millimetres, at a speed of up to 30 km/h. At faster speeds the vehicle automatically returns to the normal level. In the Comfort drive program the vehicle remains at standard height. If the Vito reaches a speed of 110 km/h, the van autonomously lowers by 10 millimetres in order to optimise consumption. In the Sport program the vehicle is lowered by 10 millimetres, irrespective of the speed. Irrespective of the selected drive program the pneumatic level control is active fully automatically and irrespective of the load. This ensures significantly more driving stability, including in trailer operation.
The AIRMATIC is available for all passenger car variants of the new Vito in conjunction with the OM 654 engine.
* The stated figures have been determined on the basis of the mandatory measuring method. They are NEFZ-CO₂-figures in terms of art.2 no.1 Directive (EU) 2017/1153. The fuel consumption figures have been determined on the base of these figures.
** Information refers to Vito 119 CDI (140 kW), rear-wheel drive, automatic, left-hand drive