Mercedes-Benz Media
EN DE
Login
EN DE
Login
Products & Brands Company Technology Sustainability Classic Sport Events
My Content
Products & Brands Company Technology Sustainability Classic Sport Events All content EN DE Products & Brands Company Technology Sustainability Classic Sport Events All content
The EQS: the first electric vehicle in the luxury class

EQS 450+ electrical consumption NEDC combined 18.9-16.2 kWh/100 km, CO₂-emissions 0 g/km | EQS 580 4MATIC electrical consumption NEDC combined 19.6-17.6 kWh/100 km, CO₂-emissions 0 g/km

Assistance systems and safety in the new EQS

Archive contentThis press release reflects the status at the time of its publication. The press release may since have become outdated.

EQS 450+ electrical consumption NEDC combined 18.9-16.2 kWh/100 km, CO₂-emissions 0 g/km | EQS 580 4MATIC electrical consumption NEDC combined 19.6-17.6 kWh/100 km, CO₂-emissions 0 g/km

Intelligent support while driving

The new EQS: the driving assistance systems

The basic functions of the systems in the Driving Assistance Package included as standard can be found here. The following are key highlights, often only available as part of the Driving Assistance Package Plus (included in the Advanced Package Plus, Premium Package or Premium Plus Package).

Active Distance Assist DISTRONIC

On all types of roads – motorways, country roads or in town – this intelligent system can automatically maintain a preset distance from vehicles ahead. Special features are the

  • Predictive speed regulation ahead of speed limits
  • Reaction at a driving speed of up to 100 km/h to stationary vehicles on the road
  • Selection of DISTRONIC dynamics in MBUX, independently of DYNAMIC SELECT
  • Adjustment of set speed and acceleration for maximum range
  • With the navigation with Electric Intelligence (see separate chapter), the charging status at the destination or also at the intermediate charging point can be specified if desired when route guidance is activated. Active Distance Assist DISTRONIC then adjusts the acceleration behaviour and, if necessary, the cruising speed to meet this specification.
  • Also new is the adjustment of the set speed at rest areas to 50 km/h.

Active Steering Assist

This helps the driver to stay in lane at speeds up to 210 km/h. Special features are

  • Lane detection at low speeds additionally with 360° camera
  • Significantly improved availability and performance on bends on country roads
  • Improved lane centring on motorways
  • Situation-specific off-centred driving (e.g. forming an emergency corridor, but also following the road edge on country roads with no centre marking)

Traffic Sign Assist

In addition to conventionally signposted speed limits, this recognises overhead gantries and signs at roadworks. This includes warnings about running a stop sign and a red light.

Active Lane Keeping Assist

In a speed range of 60 to 210 km/h, Active Lane Keeping Assist uses a camera to detect when road markings or road edges are crossed, helping the driver to avoid leaving the driving lane unintentionally. The system also intervenes if there is a danger of collision with detected road users in the adjacent lane, e.g. with overtaking or oncoming vehicles. Special features are

  • The reaction to detected lane edges, e.g. a grass shoulder
  • Particularly intuitive steering intervention
  • Adjustment of sensitivity via a menu (early, medium, late)
  • The addition of Active Ambient Lighting, DIGITAL LIGHT and the Augmented Reality Head-up Display to the hazard warning system

Active Lane Change Assist

Active Lane Change Assist cooperatively assists the driver of the EQS when changing to an adjacent lane. A lane change to the right or left is only assisted if the sensors detect that the adjacent lane is separated from the present lane by interrupted lane markings, and no other vehicles are recognised in the relevant danger zone. In conjunction with DIGITAL LIGHT, an intuitive lighting scenario is also created at night.

Active Emergency Stop Assist

Active Emergency Stop Assist brakes the vehicle to a standstill in its own lane if it recognises that the driver is no longer responding to the traffic situation for a longer period. As part of the standard Active Lane Keeping Assist, this works even if Active Distance Assist DISTRONIC with Steering Assist is not switched on. Other features:

  • Belt tensioning and braking impulse as a final signal of impending braking action
  • Optional single lane change (at 80 km/h, no obstacles in adjacent lane)

ATTENTION ASSIST

This system included as standard is able to recognise typical signs of drowsiness and driver inattention, and displays a warning message prompting them to take a break. The additional micro-sleep warning is a new feature. It analyses the driver's eyelid movements through a camera on the driver's display (only in conjunction with MBUX Hyperscreen). The micro-sleep warning function is already active from a speed of 20 km/h.

Active Brake Assist with cross-traffic function

Active Brake Assist uses the on-board sensors to register whether there is a risk of collision with vehicles travelling ahead, crossing or oncoming. The system can give the driver a visual and audible warning if a collision appears imminent. If the driver's braking response is too weak, the system can also assist by increasing the brake pressure as the situation demands, and also initiate autonomous emergency braking if the driver fails to respond. Special features are the turning function when starting off (including crossing pedestrians when turning), the cross-traffic function on interurban routes (up to 120 km/h) and the warning and braking for oncoming traffic.

Active Blind Spot Assist and exit warning function

Active Blind Spot Assist can give a visual warning - and if the indicators are operated also an audible warning - of potential lateral collisions in a speed range from around 10 to 200 km/h. If the driver ignores the warnings and still tries to change lanes, the system can take corrective action by one-sided braking intervention at the last moment if the speed exceeds 30 km/h. When the vehicle is stationary, the exit warning function can warn against exiting because a vehicle (or even a bicycle) is passing within the critical area. This function is available at standstill and up to three minutes after the start switch has been turned off. In addition, the hazard display is supplemented with the aid of Active Ambient Lighting (also with the vehicle exit warning). Thanks to the cameras of MBUX Interior Assistant, a danger warning can be given even if the driver or front passenger merely moves a hand towards the door handle.

Evasive Steering Assist

Evasive Steering Assist can assist the driver when seeking to avoid another road user detected by the system in a critical situation. In the new EQS, in addition to standing and crossing pedestrians, pedestrians and vehicles as well as cyclists along the route are also taken into account. The speed range goes up to 110 km/h, support is also provided on country routes.

 

Easy entry into confined parking spaces and narrow entrances

The new EQS: The parking assistants

The EQS comes with the Parking Package with reversing camera as standard. Thanks to powerful sensors that monitor the vehicle's surroundings, the parking systems can help the driver with manoeuvring in many areas. The integration of Parking Assist in MBUX makes operation intuitive and fast. In conjunction with the Driving Assistance Package, emergency braking functions offer particular protection for other road users.

Here are three particularly innovative parking systems:

With Remote Parking Assist, the driver can manoeuvre the vehicle into and out of parking spaces from close by using a smartphone. This means more comfort when getting in and out and protects against damage when opening the doors. With the latest generation of Remote Park Assist, many parking manoeuvres are possible. The driver monitors the parking process. Manoeuvring is automatic as long as the driver keeps the touch surface on the phone pressed and tilts it by 90°. Otherwise, the vehicle is automatically braked to a standstill.

Memory Parking Assist (SAE level 2) can remember parking locations such as how to get to and from the garage at home. The driver sits behind the steering wheel and is asked whether they would like to carry out an automated parking procedure after the training process has been completed. If obstacles are detected, the system stops until they are removed.

With the pre-installation for the INTELLIGENT PARK PILOT, the EQS is prepared for automated valet service (AVP, SAE level 4). If equipped with the required optional equipment and the corresponding Connect service (depending on the country), the vehicle has the technology on board to manoeuvre into and out of parking spaces fully automatically and without the driver in car parks equipped with AVP infrastructure, provided that national laws allow such operation.

But the other parking systems also support the driver in a variety of ways. Would you have known that...

... Active Parking Assist also uses the rear axle steering and can thus enter the parking space with even greater agility? The calculation of the lanes (trajectories) is adjusted to this. And when things get really tight, it can make up to 12 moves. The process for manoeuvring out of a parking space is completed at the latest when the vehicle is at an angle of 100° to the start position. Acceleration, steering, braking, gear changes and turn indicators are controlled automatically. The driver remains responsible and has the possibility to intervene at any time and correct or complete the parking manoeuvre.

... when driving past recognised parking spaces, one press of the button on MBUX is sufficient to start the parking process? This is the so-called Quick Park function of Active Parking Assist.

... the Drive Away Assist can warn the driver if a collision with detected objects could occur when starting off due to a mix-up of accelerator and brake pedal or a wrong gear? At the same time, the speed is briefly limited in such cases if the danger of collision is detected.

... the Parking Package with 360° camera fuses the information from many sensors and cameras? This will allow more parking spaces to be identified and offered for automated parking, including spaces demarcated by lines (rather than vehicles). There are a total of 12 ultrasound sensors at the front and rear, a rear-view camera in the boot lid, and three additional cameras in the exterior mirrors and at the front.

... a real-time rendered vehicle model in the Parking Package with 360° camera displays status such as indicating or braking? Visualises obstructions in the field of vision, e.g. open doors

... collision protection has been further extended to cross traffic? If the sensors detect other vehicles crossing during forward or reverse travel, the driver is first warned visually and audibly. The rear collision protection goes even further: If the driver does not react and the detected danger persists, the vehicle initiates autonomous emergency braking. The function, which is dependent on equipment, is called Rear Cross-Traffic Alert.

... the Active Parking Assist in the EQS also visualises the distance to obstacles from the driver's perspective with the help of the Active Ambient Lighting? As before, the distance is also transmitted acoustically and displayed on the screen.

 

 

Use your time in the car more effectively and conveniently have it manoeuvre into and out of parking spaces

The new EQS: DRIVE PILOT for conditionally automated driving

It is expected that from the first half of 2022, the EQS with the new DRIVE PILOT will be able to drive in conditionally automated mode at speeds of up to 60 km/h in heavy traffic or congested situations on suitable sections of motorway in Germany. This relieves the burden on drivers and enables them to carry out secondary activities1 such as surfing the internet or processing emails in the In-Car Office. This allows them to use their time more effectively. Mercedes-Benz goes a step further when it comes to parking: With the pre-installation for the INTELLIGENT PARK PILOT, the EQS is prepared for automated valet service (AVP, SAE level 4). Together with the required optional equipment and the corresponding Connect service (depending on the country), the new EQS has the technology on board to park fully automatically and driverless in car parks equipped with the AVP infrastructure, provided that national laws permit such operation.

On suitable motorway sections and where traffic density is high, the DRIVE PILOT can offer to take over the driving, initially up to the legally permitted speed of 60 km/h. The controls needed for this are located in the steering wheel rim, on the left and right above the thumb recesses. When the driver activates the DRIVE PILOT, the system controls the speed and distance, and effortlessly guides the vehicle within its lane. The route profile, events occurring on the route and traffic signs are correspondingly taken into consideration. The DRIVE PILOT can also recognise unexpected traffic situations, and deal with them autonomously by evasive action within its lane or braking action.

With LiDAR sensor and redundant systems

The DRIVE PILOT builds on the surround sensors of the Driving Assistance Package and comprises additional sensors that Mercedes-Benz considers indispensable for safe conditionally automated driving. These include LiDAR, an additional camera in the rear windscreen and microphones, which are particularly useful for recognising the flashing blue lights and other special signals of emergency vehicles. In addition to the sensor data, the DRIVE PILOT receives information about the road geometry, route profile, traffic signs and unusual traffic events (e.g. accidents or roadworks) from a digital HD map. This is made available via a back-end connection and is also continuously updated in a self-learning manner. The vehicle's location is determined using a highly precise positioning system that goes well beyond the usual GPS systems. The EQS with the optional DRIVE PILOT also has redundant steering and brake systems and a redundant on-board electrical system, so that it remains manoeuvrable even if one of these systems fails and the safe handover to the driver is ensured.

A powerful central control unit provides the necessary sophisticated software functions for conditionally automated driving. Artificial intelligence is used for image processing, for example. As part of the state-of-the-art safety architecture, all algorithms are calculated twice.

While using the DRIVE PILOT, the driver can turn away from what is happening on the road and engage in certain other activities, e.g. communicating with colleagues via In-Car Office, browsing the web or enjoying a relaxing seat massage. This is because in DRIVE PILOT mode, functions can be enabled that are otherwise blocked when driving.

Conditionally automated driving on suitable motorway sections where traffic density is high

When the vehicle approaches the end of a route section that is suitable for the DRIVE PILOT, for example a tunnel, or if other conditions change, perhaps the weather or the traffic situation (for example when a tailback begins to flow freely), the driver is prompted in good time to retake control. As a general principle, the driver must always be ready to retake control and immediately resume driving as necessary when the system prompts them to do so, or if it is obvious that the conditions for the intended use of the DRIVE PILOT no longer apply. Sleeping, looking to the rear for longer periods or even leaving the driver's seat are not permitted. To ensure that the driver is able to take control, the cameras of the driver display monitor movements of the head and eyelids.

If the driver fails to take back control even after increasingly urgent prompting, e.g. due to a severe health problem, the DRIVE PILOT brakes the vehicle to a standstill in a controlled manner and with suitable deceleration. At the same time the hazard warning lights and, once the vehicle has come to a standstill, the Mercedes-Benz emergency call system are activated and the doors and windows are unlocked, to make access to the interior easier for any first responders. Naturally the driver can also deactivate the DRIVE PILOT at any time without any prompting by the system. This is done via the steering wheel buttons, or by manually intervening in the vehicle's control functions.

The basic introduction of DRIVE PILOT in other countries of Europe, in the USA and China is expected to occur gradually as soon as a national legal framework for highly automated operation (SAE Level 3), which allows departure from the task of driving in particular, is also in place there.

INTELLIGENT PARKING PILOT: highly automated driverless parking in suitable multi-storey car parks

Mercedes-Benz goes a step further when it comes to parking: With the pre-installation for the INTELLIGENT PARK PILOT, the EQS is prepared for automated valet service (AVP, SAE level 4). Together with the required optional equipment and the corresponding Connect service (depending on the country), the new EQS has the technology on board to park fully automatically and driverless in car parks equipped with the AVP infrastructure, provided that national laws permit such operation.

The vision: The driver parks their vehicle securely within a predefined drop-off area of the parking garage and starts the parking process via smartphone app after all occupants have exited. The sensor system in the car park checks whether a suitable space is available. If so, the driver receives confirmation on the app that the vehicle has been taken over by the AVP infrastructure. Now they can leave the EQS and the car park.

The vehicle is then started automatically, and automatically drives to its parking space with the help of the infrastructure installed in the car park. Conversely, the driver can have their EQS drive up to a predefined pick-up area by smartphone command.

Remote Parking Assist: convenient manoeuvring into and out of parking spaces

Without a driver on board, the EQS is on the move with Remote Parking. However, the driver is still responsible. Remote Parking Assist[2] allows drivers to control a parking process via their smartphone and the Remote Parking App while outside but in the immediate vicinity of the vehicle. This means more comfort when getting in and out and protects against damage when opening the vehicle doors.

Remote Parking Assist parks the vehicle at the driver's request and under the driver's constant control if an appropriate parking scenario has been selected via the central display in the EQS or the app on the smartphone. The driver-monitored parking procedure continues automatically as long as the driver presses the touch surface on the smartphone while tilting it by 90°. If the control surface is no longer pressed or the smartphone is no longer tilted, the vehicle is automatically braked to a stop.

In addition to complete scenarios involving manoeuvring into and out parking spaces, Remote Parking Assist has an Exploration mode. This allows the EQS to manoeuvre straight in and out of garage entrances or end-on parking spaces, for example, by using the smartphone for the last few metres.

It is not only this which has considerably simplified operation compared to the previous Remote Parking generation. Compatibility with different phones has also been increased. While the vehicle and smartphone previously communicated via Bluetooth, a WiFi connection in the 2.4 GHz band is now also available. Initially linking the vehicle and smartphone has also been improved. A QR code can now be used for faster, more convenient authorisation.

When remote parking, the driver continues to have full responsibility for the vehicle and its control during the entire parking procedure. He/she can interrupt or cancel the parking procedure with the smartphone or the vehicle key at any time, and take back control.

In addition to Remote Parking Assist, the Parking Package with remote parking functions also includes Memory Parking Assist. This SAE Level 2 system can remember parking locations such as how to get to and from the home garage. The driver sits behind the steering wheel and is asked if he or she would like to perform an automated parking procedure. Thanks to the memory function, the system remembers how to park in a learned parking space and automatically drives into the garage. If obstacles are detected, the system stops until they are removed.

 

Accident protection is not a question of the powertrain concept

The new EQS: passive safety

The principles of Integral Safety, in particular accident safety, apply regardless of the platform. Like all other Mercedes, the EQS therefore features a rigid passenger compartment, special deformation zones and state-of-the-art restraint systems. PRE-SAFE® is standard.

The fact that the EQS is based on an all-electric architecture also opened up new design possibilities for its safety concept. Thus, the installation space for the battery could be favourably selected in a crash-protected area in the underbody (for details on battery safety, see separate chapter). And because there is no large crankcase on board, the behaviour in a frontal crash could be modelled even better. In addition to the standard crash tests, the car's performance in various additional load situations was verified and extensive component tests carried out at the Vehicle Safety Technology Centre (TFS). Internally the new body structure bears the designation "flat-floor concept".

Safety structure: designed for many eventualities

The body of the EQS is made for the most part from aluminium. In addition to the outer skin, the longitudinal members are also made from this material. Additional reinforcement elements made from high-strength steel are also used in the main floor. In the bodyshell structure, press-hardened steel reinforcements are intelligently integrated and combined with high-strength, hot-formed steel components. This is how the strict Mercedes crash requirements are met.

Frontal impact

So that the front end of the EQS absorbs energy as evenly as possible, a large-scale crossmember links the two longitudinal members together. As in every Mercedes-Benz, the cross connection not only serves as self-protection, but is also a key component for the protection of other road users. Deformable crash boxes are attached to the crossmembers, which helps to increase ease of repair in the event of minor damage.

In a severe frontal impact, two aluminium longitudinal members made from extruded profiles absorb the main energy. A supporting role is played by an upper load path on the shock-absorber strut and a lower load path along the integral carrier. The integral carrier made of steel not only accommodates the eATS and axle components, but it also plays a key role in the event of a crash. In the case of severe deformations, the wheels form an additional load path, whereby they move towards the rear and are braced against the sill and/or side wall. The geometry and strength of the sills have been designed for this accordingly. The battery is protected between the integral carrier and the battery housing by honeycomb-shaped elements. The battery housing itself is extremely rigid and allows for relatively little deformation, so that the cells inside are not damaged. Reinforcing structural components have been additionally integrated into the front area of the underbody with minimal overlap for the load conditions.

Side impact

In principle, in a side impact only a very small deformation path is available. Extremely sturdy structures in the EQS therefore serve to protect the occupants as well as the battery. Alongside the doors with their reinforcements, the side wall structure also comprises the pillars, the side roof frame and the side members/sills. Cross reinforcements in the underbody as well as the very rigid battery housing contribute to the high stability in a side impact. The extruded aluminium support profiles of the sills are shaped specifically and designed in terms of their deformation characteristics in such a way as to enable damage to the battery modules to be avoided as far as possible.

Rear impact

The EQS is also equipped for a rear impact. As with the front-end assembly, a crossmember with bolted-on crash boxes helps to distribute the impact energy from a one-sided load to both longitudinal members. Thanks to the specific design of the structural components and the rear axle carrier, the requirements in terms of battery safety have been fulfilled.

Rollover

In a rollover it is particularly important that sufficient headroom is retained. At Mercedes-Benz, global requirements in terms of survival space are applied, which are checked by means of the roof-drop test for example. These naturally apply to the EQS as well.

High-voltage system: automatic shut-off in accidents

The battery, high-voltage (HV) cables and other HV components have been designed and protected in such a way that they meet Mercedes-Benz's high safety requirements in the event of an accident. You can read more about this in the chapter "Under the magnifying glass: high-voltage safety".

The multi-stage protection concept of the high-voltage (HV) system has already proven itself in the other Mercedes-EQ models. In case of danger, it can be automatically switched off and disconnected from the battery. A distinction is made between a reversible and an irreversible shut-off. The reversible shut-off occurs in more minor accidents. In this case it is possible to switch the high-voltage system back on again when an insulation measurement carried out by the vehicle beforehand does not detect an error. This means that vehicles still capable of being driven can continue their journey. Only in severe accidents, in which as a rule the vehicle is in any case no longer capable of being driven, is the high-voltage system irreversibly switched off. It can no longer be activated without repair. When shutting down, there is a provision to ensure that within a few seconds there is no residual voltage in the high-voltage system outside the battery that could cause injury.

There are also shut-down points where emergency teams can deactivate the high-voltage system manually. Furthermore, as standard the EQS features crash monitoring when stationary.

Acoustic Vehicle Alert System: special sound as a warning for pedestrians

The electric car-specific innovations include an Acoustic Vehicle Alert System (standard). This makes it easier for pedestrians to notice the EQS at low speeds. One sound generator sits weatherproof in the front right wheel arch and in the rear underbody respectively. An EQ-specific sound is generated up to a vehicle speed of approx. 30 km/h. Initially it becomes louder and higher with increasing speed. This change allows conclusions to be drawn about the driving status (braking/acceleration).

Above 20 km/h the sound is then already gradually reduced, since the vehicle can then be perceived by its tyre and wind noise. If the speed drops from a higher speed back down to 30 km/h, the sound is faded in again. When reversing, an intuitively recognisable interval tone sounds regardless of the speed.

Modern restraint systems: from B for belt airbag to W for window airbag

In addition to driver and front passenger airbags, a knee airbag on the driver's side is also standard. It protects the legs from contact with the steering column or instrument panel in a severe frontal crash. This can prevent or lessen the severity of injuries.

The standard window airbags can reduce the risk of head impact with the side window or penetrating objects. In the event of a serious side collision, the window airbag on the side of the impact extends from the A- to the C-pillar like a curtain over the front and rear side windows. If a rollover is detected, the window airbags can be activated on both sides.

Vehicles for Europe also have a centre airbag to meet new rating requirements. During a severe side impact, it positions itself between the driver and front passenger seat, reducing the risk of their heads making contact. It is integrated into the driver's seat backrest in the middle of the vehicle.

In conjunction with power rear seats, the EQS is equipped with side airbags in the rear. They protect the chest area on the outer rear seats in the event of a severe side impact and supplement the protection provided by the standard window airbags.

The belt airbags (optional extra) ensure that passengers in the outer rear seats are particularly well protected in the event of a severe frontal collision. The inflatable webbing widens its contact area in the chest and shoulder area almost threefold when triggered. This can reduce the loads acting on the occupants' thorax.

In conjunction with the Exclusive nappa leather Package, the EQS has designer belt buckles at the front and rear. They support buckling up, because the lights of the belt buckle pulsate at that time. When stationary and at low speed, the lights are solid.

The EQS has i-Size child seat attachments as standard on the two outer rear seats. With two anchors each between the seat back and the seat cushion, corresponding child seats are installed particularly quickly and securely. Top tether attachment points behind the rear head restraints provide additional support.

PRE-SAFE®: precautionary protection as standard

The PRE-SAFE® preventive occupant protection system is fitted as standard in the EQS. Together with the familiar precautionary measures in the event of a potential frontal and rear-end crash, PRE-SAFE® Impulse Side (available in conjunction with the Driving Assistance Package Plus or the Driving Assistance Package with DRIVE PILOT) forms a kind of virtual crumple zone that extends around the vehicle.

As only a limited crumple zone is available in a side impact, PRE-SAFE® Impulse Side (availability depending on selected equipment) can move the affected driver or front passenger away from the danger even before the crash as soon as the system detects that a side collision is immediately imminent. For this purpose, air chambers in the side bolsters of the front seat backrest are inflated in fractions of a second.

 

 

Developed with software from the film and gaming industry

The new EQS under the magnifying glass: innovative design methods for bodyshell components

The example of the mounting bracket for the belt retractor shows how much design work is involved behind individual details in the body shell. This component was developed using the "bionic mesh design" method. The complex simulation has a positive effect on the overall weight and stability.

Getting rid of excess pounds later is always difficult. Not only diet professionals know this, but also vehicle developers. Ideally, each component is therefore designed to be as light as possible right from the development stage.

The so-called "bionic mesh design" method was used for the mounting bracket for the belt retractor of the EQS. With software support, the designer receives design proposals with the greatest possible lightweight construction potential. However, interpretation and remodelling of these bionic, i.e. nature-inspired, designs would possibly take several weeks using the standard CAD programs of the automotive industry.

The "Bionic Mesh Design" team at Mercedes-Benz therefore used software tools from the film and gaming industry that are designed to quickly model the geometry of complex objects. Thus, the design proposal became a producible component within a short time. A specially programmed interface enables the geometry of the component to be transferred directly to the Mercedes-Benz CAD systems for further processing. The mounting bracket has since won an award: The "Bionic Mesh Design" team from Mercedes-Benz received a special prize as part of the Daimler Pioneers and Innovation Awards 2019.

The "Bionic Mesh Design" team is currently working together with the forge, foundry and design departments on further pilot projects relating to the chassis, powertrain and overall vehicle design.

 

 

High level of protection against high voltages

The new EQS under the magnifying glass: high-voltage safety

To avoid electric shocks and high-energy short circuits, Mercedes-Benz has developed a multi-stage high-voltage safety concept comprising seven key elements. Alongside the battery, part of the high-voltage system includes all components with a voltage level higher than 48 volts. The protection concept provides a high degree of safety when driving, both during and after a crash.

  1. Separate positive and negative lines
    A conventional 12 V on-board electrical system uses the vehicle body as negative terminal ("earth"). The high-voltage (HV) system, on the other hand, is fully insulated down to the vehicle structure: all HV components are connected to each other with both a positive and a negative line. The HV lines can be identified by means of their orange sheathing. Even if damage should occur, there is no danger of an electric shock or short circuit, since even in this case there is no closed electric circuit.
  2. HV system self-test
    The entire HV system, in particular the battery, continually monitors itself. By means of continual temperature, insulation and short circuit measurements, fault currents are detected and displayed at an early stage. A so-called interlock switching circuit incorporates all of the HV components and monitors whether all of the components are connected correctly. Errors in the system are displayed and if there is any doubt the HV system cannot be started, or is even automatically switched off.
  3. Protection zones
    Based on more than 50 years of accident research by Mercedes-Benz involving thousands of investigated accidents, a protection zone concept has been specially developed for electric vehicles. As part of this the vehicle is divided into three areas.
    • Outer zone: in the case of minor damage, the HV system is mostly unaffected and therefore does not need to be automatically switched off. That's because the high-voltage components are either located outside of the area affected by such minor damage or are safeguarded by additional measures (see 4. Inherent stability).
    • Inner zone: if the vehicle is affected by more severe accident damage, the HV system is automatically switched off (see also point 6): in an accident of such severity the airbags are generally deployed. Depending on the severity of the accident and degree of damage, the HV system is switched off reversibly or irreversibly. Either the customer can therefore switch it back on again himself/herself, or activation is only possible again after replacing some parts.
    • Core zone: in the third vehicle area, usually no or only slight deformation occurs in crash tests. This protection area is suitable for accommodating the HV battery or particularly sensitive components, for example.
  4. Inherent stability
    In the case of HV components in the outer deformation areas, rigid housings in particular make a contribution towards protecting components. For this, during vehicle development, damage patterns and load levels are derived from crash simulations and crash tests. Affected HV components must also be protected against contact after the crash. The requirements are particularly high for the mechanical properties of the HV batteries. Here, alongside standard crash tests, further load cases are also used to provide even further cover of actual accidents conditions.
  5. Reinforcement measures
    All HV components are connected to each other with HV lines. HV cables are flexible lines which in some cases can also be routed inside structural areas. Although in any event this usually involves two separate lines, they are additionally sheathed in particularly sensitive locations in order to prevent a loss of insulation if crushed. With other HV components, too, alongside inherent stability the protection level can also be further increased, for example through specifically guide surfaces or protective shields.
  6. Automatic crash shut-off of the HV system
    As soon as a specific accident severity is detected in an impact, the HV system is switched off. As part of this, relays are opened in the HV battery which prevent further power from being fed into the HV system. Components which are connected to the battery are discharged in just a few seconds such that only a non-critical voltage level remains present.

    In less severe accidents, a reversible shut-off only takes place preventively by means of a simple shut-down indication. When the driver tries to re-start the vehicle, an insulation check automatically takes place prior to switching back on. If no insulation error is detected as part of this, switching back on is permitted. In severe accidents, after which in any event it is no longer possible to continue driving, the HV system is irreversibly switched off through the ignition of a pyrofuse. The vehicle can then no longer be started.
    A particular highlight is the "stationary crash detection": when switched off while charging, the EQS is also able to detect a severe impact and quickly interrupt the charging process. This helps to achieve a particularly high level of protection for the high-voltage system.
  7. Manual shut-off option for emergency services
    For the emergency services the vehicles feature additional shut-off options for the HV system, so-called rescue separation points. The installation locations are recorded in the rescue datasheets. For towing away, too, for example, a manual shut-off is useful when the vehicle is only slightly damaged and it cannot be clearly determined whether an automatic crash shut-off has occurred.

 

 

Technical data3

EQS 450+

Drive system and battery

Drive system

 

Rear-wheel drive

Electric motor(s):

Type

Permanently excited synchronous motor (PSM)

Output (peak)

kW

245

Torque (peak)

Nm

568

Battery type

 

Lithium-ion

Rated voltage

V

396

Recuperation capacity, max.

kW

186

AC charging capacity, max. (onboard charger, standard/optional)

kW

11/22

AC charging time4, three-phase (11/22 kW)

h

10/5

DC charging capacity, max.

kW

200

DC charging time5 at fast charging station (DC)

min

31

DC charging6: range after 15 minutes (WLTP)

km

Up to 300

Suspension

Front axle

Four-link front axle, air suspension strut, adaptive gas-pressure shock absorber, anti-roll bar

Rear axle

Five-link independent rear suspension, air suspension, adaptive gas-pressure shock absorber, anti-roll bar

Front brakes

Four-piston fixed calliper disk brake, internally ventilated

Rear brakes

Single piston combined floating brake calliper disk brake at the rear, internally ventilated, electric parking brake

Steering

Electrically assisted rack-and-pinion power steering system, standard-fit rear axle steering (4.5°)

Dimensions and weights

Number of doors/seats

 

4/5

Length/width/height

mm

5216/1926/1512

Wheelbase

mm

3.210

Turning circle (with rear axle steering 4.5°/10°)

m

11.9/10.9

Boot capacity, VDA

L

610-1770

Kerb weight7/perm. gross vehicle weight/max. payload

kg

2480/2945-3025/465-545

Perm. towing capacity (braked/unbraked)

kg

750/750

Performance, consumption and range

Acceleration 0-100 km/h

s

6.2

Maximum speed

km/h

210

Combined consumption (WLTP)

kWh/100 km

19.8-15.8

CO₂ emissions (WLTP)

g/km

0

Combined consumption (NEDC)

kWh/100 km

18.9-16.2

CO₂ emissions (NEDC)

g/km

0

Max. range (WLTP)

km

780

       

 

 

Technical data8

EQS 580 4MATIC

Drive system and battery

Drive system

 

All-wheel drive

Electric motor(s):

Type

Permanently excited synchronous motors (PSM)

Output (peak)

kW

385

Torque (peak)

Nm

855

Battery type

 

Lithium-ion

Rated voltage

V

396

Recuperation capacity, max.

kW

290

AC charging capacity, max. (onboard charger, standard/optional)

kW

11/22

AC charging time9, three-phase (11/22 kW)

h

10/5

DC charging capacity, max.

kW

200

DC charging time10 at fast charging station (DC)

min

31

DC charging11: range after 15 minutes (WLTP)

km

Up to 260

Suspension

Front axle

Four-link front axle, air suspension strut, adaptive gas-pressure shock absorber, anti-roll bar

Rear axle

Five-link independent rear suspension, air suspension, adaptive gas-pressure shock absorber, anti-roll bar

Front brakes

Four-piston fixed calliper disk brake, internally ventilated

Rear brakes

Single piston combined floating brake calliper disk brake at the rear, internally ventilated, electric parking brake

Steering

Electrically assisted rack-and-pinion power steering system, standard-fit rear axle steering (4.5°)

Dimensions and weights

Number of doors/seats

 

4/5

Length/width/height

mm

5216/1926/1512

Wheelbase

mm

3.210

Turning circle (with rear axle steering 4.5°/10°)

m

11.9/10.9

Boot capacity, VDA

L

610-1770

Kerb weight12/perm. gross vehicle weight/max. payload

kg

2.585/3.060-3.135/475-550

Perm. towing capacity (braked/unbraked)

kg

750/750

Performance, consumption and range

Acceleration 0-100 km/h

s

4.3

Maximum speed

km/h

210

Combined consumption (WLTP)

kWh/100 km

21.4-18.3

CO₂ emissions (WLTP)

g/km

0

Combined consumption (NEDC)

kWh/100 km

19.6-17.6

CO₂ emissions (NEDC)

g/km

0

Max. range (WLTP)

km

676

       

 

 

1 The legally permissible secondary activities of the driver depend on the relevant national traffic regulations.

2 The service can be used free of charge for three years from activation

3 Last revised: 8 June 2021; the electrical consumption (and information based thereon) has been determined on the basis of Commission Regulation (EC) 692/2008 according to NEDC and Commission Regulation (EU) 2017/1151 according to WLTP

4 The charging times are for a 10-100% full charge at a wallbox or public charging station (AC connection with at least 11/22 kW, 16/32 A per phase)

5 The charging times are for a 10-80% charge at a DC fast charging station of category "K" or "L" pursuant to EN17186 with 500 A charging current

6 At DC fast charging stations with 500 amps based on WLTP range

7 Ready-to-drive acc. to EU

8 Last revised: 8 June 2021; the electrical consumption (and information based thereon) has been determined on the basis of Commission Regulation (EC) 692/2008 according to NEDC and Commission Regulation (EU) 2017/1151 according to WLTP

9 The charging times are for a 10-100% full charge at a wallbox or public charging station (AC connection with at least 11/22 kW, 16/32 A per phase)

10 The charging times are for a 10-80% charge at a DC fast charging station of category "K" or "L" pursuant to EN17186 with 500 A charging current

11 At DC fast charging stations with 500 amps based on WLTP range

12 Ready-to-drive acc. to EU

Pictures
68

The EQS: the first electric vehicle in the luxury class
The EQS: the first electric vehicle in the luxury class
The EQS: the first electric vehicle in the luxury class

Documents
4

PDF
ENGLISH: The EQS: the first electric vehicle in the luxury class
PDF
SPANISH: El EQS: el primer automóvil eléctrico en la gama de lujo

Press contacts
1

Jan Weber
Manager Product & Technology Communications Mercedes-Benz Vans & Cross Functions
*The stated values were determined in accordance with the prescribed WLTP (Worldwide harmonised Light vehicles Test Procedure) measurement procedure. The energy consumption and CO₂ emissions of a car depend not only on the car’s efficient use of the fuel or energy source, but also on driving style and other non-technical factors. Press contacts
More information
EN DE
  • Provider
  • Legal Notice
  • Settings
  • Privacy
  • Do not sell or share my personal information
  • Terms of Use
  • Support
  • Third Party License Notice
  • Accessibility