The technology of the new EQA
- 14 Pictures
- 5 Documents
EQA 250 (combined electric consumption: 15.7 kWh/100 km; combined CO₂ emissions: 0 g/km)
Powertrain
Efficient driving pleasure
The EQA is being launched as the EQA 250 (combined electrical consumption: 15.7 kWh/100 km; combined CO₂ emissions: 0 g/km)1 with 140 kW and a range according to NEDC of 480 kilometres. The "double-decker" lithium-ion battery, which sits as a structural element within the underbody of the vehicle, has a usable energy content of 66.5 kWh. Further variants to meet specific customer requirements will follow. These will include on the one hand all-wheel-drive models with an additional electric powertrain (eATS), and on the other hand a version with a range of more than 500 kilometres (WLTP)2.
An asynchronous motor is used at the front axle. The electric motor, a fixed-ratio transmission with a differential, the cooling system and the power electronics form a highly integrated, very compact unit - the electric powertrain (eATS). The transmission ratio and gear wheels have been configured for the requirements of the front-wheel drive system.
The more powerful models include a further electric powertrain (eATS) at the rear axle featuring a redesigned, permanently excited synchronous motor. This is extremely compact in design. In a permanently excited synchronous motor, the rotor of the AC motor is studded with permanent magnets. The magnets – and thus the rotor – follow the rotating alternating current field in the winding of the stator. The engine is said to be synchronous, because the rotor turns at the same rate as the magnetic field of the stator. The rate is adjusted to the speed requirements of the driver in the frequency converters of the power electronics. The advantages of this design include the high power-to-size ratio, high level of efficiency and high output consistency.
The balance of performance between the front and rear axles in the 4MATIC versions is intelligently adjusted up to 100 times per second, depending on the driving situation. The Mercedes-EQ philosophy is to optimise consumption by using the rear electric motor as often as possible, while the asynchronous motor at the front axle generates only minimal drag losses in partial-load operation.
Technical data3
|
|
| EQA 250 |
| Drive system layout |
| Front |
| Electric motor, front axle | Model | Asynchronous motor |
| Rated output | kW | 140 |
| Rated torque | Nm | 375 |
| Acceleration 0-100 km/h | s | 8.9 |
| Top speed4 | km/h | 160 |
| Battery capacity, usable (NEDC)5 | kWh | 66.5 |
| Combined fuel consumption (NEDC)2 | kWh/100 km | 15.7 |
| NEDC range2 | km | 486 |
| Charging time6 at wallbox or at public charging stations (AC charging) | h | 5:45 |
| Charging time7 at a rapid charging station (DC) | min | 30 |
In overrun mode or during braking, the electric motors become alternators: their mechanical rotation is converted into electrical energy and used to charge the high-voltage battery - a process known as recuperation (for details see the next section on "Recuperation").
The battery: Part of the intelligent thermal management system
The EQA is fitted with a lithium-ion battery with a high energy density. The battery is made up of five modules and is located underneath the passenger compartment in the middle of the vehicle. The lowest point of the vehicle, however, is the lower edge of the side skirts, giving the EQA more than 200 mm of ground clearance.
The battery features a "double-decker" design, making it another example of the intelligent use of space: The "nose" of the battery, which accommodates the battery management system, is situated towards the front, behind the centre console. An aluminium housing as well as the body structure of the vehicle itself protect the component from potentially touching the ground and against loose chippings. The battery housing is part of the vehicle structure and thus an integral part of the crash concept (see section on "Passive safety").
The powerful high-voltage battery has a maximum voltage of 420 V and a nominal capacity of 190 Ah, giving it an energy content of 66.5 kWh.
The battery is part of the intelligent thermal management system of the EQA. To ensure that it is always kept within the optimum temperature range, it can be cooled or heated as required via a coolant-fed plate underneath the battery.
If Navigation with Electric Intelligence is activated, the battery may also be pre-heated or cooled while driving in order to ensure that it is within the ideal temperature window for a rapid charging station. On the other hand, if the battery is cold when the car reaches the rapid charging station, a considerable proportion of the charging capacity will initially be used simply to warm it up. The net effect is to optimise the charging time – important, as a means of significantly shortening the charging stop.
As for all other high-voltage batteries, Mercedes-Benz issues a battery certificate, thus providing a performance warranty. This is valid for eight years or a distance covered of 160,000 kilometres and guarantees a properly functioning high-voltage battery: the certificate also covers capacity loss in the battery.
Charging management: CCS charging socket for alternating current as well as direct current
At home or at public charging points, the on-board charger provides a convenient way of charging the EQA with up to 11 kW using alternating current (AC). The charging time required for a full charge depends on the available infrastructure and the country-specific vehicle equipment. Charging at a Mercedes-Benz Wallbox is considerably faster than at a domestic power socket.
And it is of course even faster at direct current (DC) rapid charging stations. Depending on the SoC (state of charge) and the temperature of the high-voltage battery, the EQA can be charged with a maximum output of up to 100 kW at an appropriate charging station. The battery can be charged in this case from 10 - 80 percent SoC in around 30 minutes. For AC and DC charging, the EQA is equipped as standard in Europe and the US with a CCS connector (Combined Charging System) in the right-hand side wall. In Japan or China the corresponding country-specific charging sockets are used. The charging times may also vary compared with those for the European model.
The following WLTP details on the stated vehicle are based on the consumption and CO₂ figures valid in the German market and are to be understood as indicative information.
Depending on the chosen equipment, the specific vehicle can lie between the "WLTP Minimum CO₂/Consumption Value" and the "WLTP Maximum CO₂/Consumption Value".
A higher figure may apply as the basis for calculating the motor vehicle tax.
|
| WLTP CO₂ emissions combined, max./min. (g/km)8 | WLTP combined electrical consumption, max./min. | Electric range total (km)1 |
| EQA 250 | 0 | 17.7 | 426 |
Recuperation
Intelligent networking ensures energy recuperation to suit the situation
ECO Assist offers a recuperation process optimised to the particular situation. It takes into account navigation data, traffic sign recognition and information from the vehicle sensors in its efficiency strategy. Anticipatory driving saves power, thereby extending the range.
ECO Assist coaches the driver with messages when the accelerator can be released, for instance because a speed limit is approaching, and with functions such as gliding and specific control of recuperation. For this purpose, navigation data, traffic sign recognition and information from the intelligent safety assistants (radar and stereo camera) are linked and processed.
ECO Assist continuously generates coasting simulations in the background: depending on the state of charge of the battery and the traffic situation, it computes whether the vehicle should ideally be allowed to coast (or "glide") with the lowest possible driving resistance with the driver's foot off the pedals, or whether it should be decelerated so that the battery can be efficiently charged (recuperation).
ECO Assist takes the following traffic situations and information into account in its driving recommendations and efficiency strategy:
-
Route profile (bends, junctions, roundabouts, gradients)
-
Speed limits
-
Distance from vehicles travelling ahead
Within the limits of the system, ECO Assist controls the overrun according to the situation as soon as the driver's foot leaves the accelerator. The driver is also given a visual prompt to do this: by showing a "foot off the accelerator" symbol in the media display (or if available, in the head-up display). At the same time, a diagram gives the driver the reason for the recommendation (e.g. "Junction ahead" or "Gradient ahead").
ECO Assist predictively computes the driving situation when deciding whether to drive with the lowest resistance or whether to recuperate. Examples include dips in the road, brows or speed limits ahead, which the system recognises from the map data.
-
Dip: The vehicle recognises that a downhill gradient is followed by a climb, and that a speed limit is shown. The driver receives the prompt "Foot off accelerator" in good time. As soon as the driver acts on this, the vehicle continues with the drive switched off. Recuperation takes place on the downhill stretch, but only enough to ensure that the maximum permitted speed is maintained. Recuperation ends just before the lowest point in the dip, and coasting commences, in order to maintain as much impetus as possible for the uphill stretch.
-
Brow: If ECO Assist recognises that "gliding" makes sense on account of the individual driving situation, the topography and the speed limits, the driver is told to "remove foot from accelerator" even before reaching the brow. The vehicle then drives over the brow in "gliding" mode, and subsequently uses the downhill stretch to reach the target speed.
-
Speed limit: When the system recognises a speed limit from the navigation data or via Traffic Sign Assist, the driver is once again prompted with "Foot off accelerator pedal". The vehicle is then gently decelerated (while recuperating) to the new speed, followed by coasting. In this way suitable speeds for junctions, roundabouts and bends are also supported.
-
Slow-moving traffic: When the radar sensors of the system recognise slow-moving vehicles ahead while coasting, gliding is automatically interrupted if necessary. Deceleration with recuperation takes place to the extent that braking action by the driver is often unnecessary. If the vehicle ahead accelerates, coasting is reactivated automatically so as to cease deceleration and maintain the current speed as much as possible. The driver operates the accelerator if needed.
The EQA offers various ways to recoup energy through recuperation. In general terms the process involves recharging the high-voltage battery by converting the mechanical rotation in overrun mode or during braking into electrical energy.
The driver can select the recuperation function manually using paddles behind the steering wheel. The two paddles behind the steering wheel can be used to influence the recuperation level. The paddle on the left increases the level of recuperation, the paddle on the right reduces it. The driver can see the selected setting in the instrument cluster. The following recuperation stages are available: DAuto (recuperation via ECO Assist to suit the particular situation, see next section), D+ (coasting), D (low recuperation), D- (medium recuperation) and D- -(high recuperation). New with the EQA is that, if the function DAuto is selected, this mode remains the setting when the car is restarted. To stop, the driver must activate the brake as normal, whatever the recuperation stage.
Navigation with Electric Intelligence and Mercedes me Charge
The easy way to reach your destination: the car takes on the task of planning the route; charging and paying are convenient and easy
Which way? And where is the next charging station? The classic responsibilities of a co-driver. In the new EQA, this job is handled by a series of intelligent assistants. Navigation with Electric Intelligence calculates the fastest route currently possible, taking into account various factors. If a charging stop is required, the driver will be directed to a charging station. Mercedes me Charge allows Mercedes-EQ customers convenient use of the charging stations of various providers, while they also benefit from an integrated payment function with simple billing processes. Mercedes me Charge enables customers to charge at more than 175,000 public charging points throughout Europe; Mercedes-Benz ensures a subsequent offset with green power.
As far as Navigation with Electric Intelligence is concerned, the name says it all. It takes numerous factors into account in an intelligent way to plan the fastest route, including charging stops, and can even react dynamically to changes, for example to traffic hold-ups. While a conventional range calculator lives from past data, the Navigation with Electric Intelligence system in the EQA looks into the future.
The calculation of the route takes into account, for example, the electric range, the current electrical consumption, the topography of the proposed route (due to the energy requirement) and the temperatures along the way (due to the duration of the charge). Further factors include the traffic situation along the planned route, as well as the available charging stations to be found there and their capacity. The customer does not necessarily always have to take on board a full charge, but will be given a specific recommendation as to the required charging time at the charging station. The charging station stops will be planned in the way that is most favourable for the overall travelling time: in certain circumstances it may be that two brief charges at a higher charging capacity will be faster than one long charge.
If the range is becoming critical, the active range monitoring system will give advice such as "Air conditioning off" or "Select ECO mode". In addition, in ECO mode the system will calculate a more efficient driving speed with which the next charging station or the destination can be reached as planned, and display this in the speedometer. If DISTRONIC is activated, this speed will be set automatically. In this mode the system will also switch to an intelligent operating strategy for the ancillary consumers in order to reduce their power requirement and thus increase the range as the situation requires.
Route planning can be undertaken in advance in the Mercedes me App. Assuming this is then confirmed in the vehicle's navigation system before the journey starts, the route will be reloaded using this latest information. In principle, the data are updated before the start of each journey and then every two minutes.
The driver is also able to make individual adjustments to the Navigation with Electric Intelligence function. In the basic setting, for example, the battery capacity is exploited to a large extent. However, as far as residual range is concerned, it is possible to select a personal safety buffer, so that the EQA will, for instance, factor in to the journey an SoC of at least 10 percent at the charging station or an SoC of 50 percent on arrival at the destination.
Green Charging – more transparency for customers
Green power, that is to say electricity from renewable resources, is a significant factor in the life cycle of an electric car as a means of preventing CO₂ emissions. The reason being that about 50 percent of the CO₂ footprint of a battery-electric vehicle is produced during the use phase with the current EU energy mix, in other words due to charging processes that involve CO₂. In order to make green charging possible in future for the customers of all purely battery-electric Mercedes-Benz EQ models and all plug-in hybrid model variants via the charging points integrated into the Mercedes me Charge service, Mercedes-Benz is starting the market rollout of Green Charging in Europe.
The driver often does not know whether a public charging station sources green power or electricity from non-renewable resources, because this is the responsibility of the different charging station operators. In order to counteract this lack of transparency and to promote the use of electricity from renewable resources, Mercedes-Benz is the first automotive manufacturer to use so-called certificates of origin to this extent for greening the charging process. This ensures that an equivalent amount of electricity from renewable resources is fed into the grid to compensate for the charging of an electric vehicle. This means that the amounts of energy used for charging are offset with green power after the actual charging process.
With Mercedes me Charge, customers have access to what is currently the world's biggest charging network: the network currently comprises more than 450,000 AC and DC charging points across 31 countries. With just a single registration, customers receive convenient access to charging stations from a multitude of suppliers, even across national borders. Navigation with Electric Intelligence ensures that Mercedes-EQ customers can easily find these points.
The Mercedes me App has been extensively revised. As well as a new look, it features improved and new functions. These include a filter option that allows the charging points to be sorted according to criteria such as availability or charging capacity. Photos and a new rating function can also help with the decision as to where to charge the EQA. Users can not only provide a star rating themselves, but can also leave a comment (anonymously) in the app. The likelihood over the course of the day of a particular charging point being busy is also determined on the basis of a probability calculation and displayed.
Authentication at the charging stations can be provided in three different ways with Mercedes me Charge: via the Mercedes me App, via the vehicle's media display, or via the Mercedes me Charge charging card.
A further advantage of Mercedes me Charge is the intelligent payment function with simple billing processes. The customer chooses the preferred payment method only once. Every charging process is then automatically debited – also in other countries. The individual charging processes are clearly listed in a monthly invoice.
Mercedes me Charge also allows access to the fast-charging stations of the pan-European network IONITY. Demonstrating a commitment to sustainability, customers using IONITY chargers charge using 100 percent renewable energy, ensuring zero-emission and carbon-neutral motoring. Two pricing models are possible in conjunction with Mercedes me Charge, including the option of a significantly discounted price at IONITY fast charging stations.
IONITY will construct and operate around 400 rapid-charging stations along the main traffic arteries in Europe by the end of 2020. As at 15 December 2020 there were already 316, with a further 44 under construction. IONITY was founded in November 2017 as a joint venture between the BMW Group, Daimler AG, Ford Motor Company and the Volkswagen Group.
Aerodynamics
Reduced drag extends range
The aerodynamic development of the EQA was largely undertaken digitally. The ensuing measurements undertaken in the wind tunnel confirmed the high quality of the numerical simulation. With a Cd value from 0.28, the EQA matches the very good figure already achieved by the GLA, although the base model includes larger, 18-inch wheels. The frontal area A totals 2.47 m2.
The EQA develops the already good aerodynamic basis of the GLA further. A new aerodynamic setup was necessary due to the new bumpers and the resulting different diffuser angle. The extent to which the air flow at the front wheels breaks away has been reduced by the design of the bumper and the configuration of the wheel spoilers, designed specifically for the EQA, with their wedge-shaped profiles.
The underbody panelling is also new. As an electric vehicle the EQA has no need for a transmission tunnel, exhaust system and fuel tank, these being replaced by a smooth-surfaced battery. The air flow along the underside of the body is guided virtually unimpeded from the front apron over the engine compartment panelling and three main floor panels through to the similarly enclosed rear axle and diffuser trim. Considerable attention was also given to the details: the ribs that give strength to the underfloor panelling, for example, all run front to back.
The cooling-air intake is also to a design specifically for an electric vehicle: since the EQA has less need of cooling than a car with a combustion engine, the upper part of the cooling-air intake could be completely blanked off. The lower section features adjustable radiator shutters.
The aerodynamic measures at a glance:
-
Aerodynamic design of front and rear aprons
-
Wheel spoilers with wedge-shaped profile at the front, wheel spoilers at the rear
-
Cooling-air control system in the lower section of the front apron, smooth panel enclosing upper air intake
-
Improved sealing of radiator section to ensure efficient use of cooling air
-
Sealed headlamp surrounds
-
Aerodynamically and aeroacoustically optimised exterior mirrors
-
Large roof spoiler, side spoilers and air flow break-away edges in the tail lights
-
Optimised underbody panelling concept including large trim panels enclosing engine compartment, main floor, rear axle, diffuser and spring links
-
Aerodynamically optimised wheels (many enclosed surfaces, minimal concavity, openings in the inner section) and tyres for all sizes of wheel.
Climate control
Sophisticated thermal management system with heat pump as standard
With automatic climate control as standard, the EQA offers the same high level of climate comfort as every Mercedes-Benz. For this it features a sophisticated thermal management system with a heat pump as standard. With its numerous innovative details, such as the reuse of the waste heat from the electric drive system, the system is configured for exceptional efficiency and thus maximum range. Pre-entry climate control also ensures that EQA drivers have no need to scrape the windscreen in the morning, nor to get into a freezing cold vehicle. And even in hot summer temperatures, the interior is cooled to a pleasant level before starting a journey.
It is possible to set the pre-entry climate control for the interior of the EQA before starting. This function is controlled directly via MBUX or via the Mercedes me App. Making use of pre-entry climate control during the charging process helps to preserve range, since the energy requirement is supplied through the charging current and does not impinge on the range.
Pre-entry climate control uses target values as a basis. This means that when the driver inputs a departure time, the EQA is climatised to the set temperature by that time. The driver can do this either individually for each journey and every stretch of the journey, or with the help of a weekly profile. Pre-entry climate control is also activated automatically for five minutes as soon as the vehicle is unlocked using the key. When pre-entry climate control, which can run for a maximum of one hour, starts or comes to an end, the driver receives a corresponding push notification.
In ECO mode the system will also switch to an intelligent operating strategy for the ancillary consumers. This reduces the power requirement, thereby increasing the range to suit the particular situation.
Efficient thermal architecture reduces energy requirement
The EQA features a sophisticated thermal architecture that includes a heat pump as standard. The system operates very efficiently: the waste heat from the electric drive system (inverter and electric motor) can be used to heat the interior. This reduces drastically the draw on battery power for the heating system, thus increasing the range.
A heat pump – a familiar concept from domestic heating systems – transports the warmth from a low to a higher temperature level. This means that "cold thermal energy"9, which occurs particularly frequently in electric vehicles, can be used to heat the interior. How the heat pump in the EQA works, at a glance:
-
Efficient reheating with air recirculation: a high proportion of recirculated air means that less (fresh) air has to be heated. To reduce the tendency for the windows to mist up, the vehicle cools the recirculating air, thereby removing moisture. The heat extracted is fed back into the interior via the water-cooled condenser and the heat exchanger. In other words, the heat is recycled.
-
Use of waste heat from the electric powertrain: see above.
-
Use of waste heat from the high-voltage battery: if the temperature of the battery rises above a defined threshold value, the waste heat can be used to heat the interior.
Low noise and vibration levels (NVH)
Systematic isolation and extensive insulation
The issue of NVH (Noise, Vibration, Harshness) is particularly important in an electric car. In the absence of the noises normally associated with a car with a combustion engine, any vibrations or irritating noises such as tyre noise become particularly intrusive. On top of this is the high-frequency excitation of the electric motor. In order to meet the high standard of noise and vibration comfort that is such a hallmark of the brand, complex measures have been taken to isolate the electric power train from the chassis and body. Numerous damping measures enhance this effect.
One of the development goals for the EQA was to achieve a balance between noise comfort and ride comfort at a high level. A particular focus of this work was on the noise from the drive system and the integration of the electric powertrain. Components with a relevance to NVH were configured accordingly during the digital development phase, checked in the hardware phase on test rigs and only then integrated into the vehicle. The final refinements were then undertaken during road testing: in the complete vehicle it was then possible to identify transmission paths, eliminate critical resonances and reduce the noise from the drive system to an acceptable level. As when a house is built, efforts were concentrated first on the body-in-white/platform and then on the interior fit-out/insulation, since the isolation or immediate encapsulation of the electric drive unit is demonstrably more effective than damping measures in the interior. The acoustic insulation measures include an enclosed passenger compartment, efficient damping systems on the metal surfaces and acoustically effective trim elements.
Pleasantly unobtrusive noise from the powertrain thanks to isolation of front- and rear-axle drive systems
The single-speed transmission that forms an integral part of the electric powertrain at the front axle (eATS) operates particularly smoothly thanks to the improved microgeometry of the gearing. NVH measures around the electric powertrain were incorporated into the EQA at an early stage of component development. The power electronics unit, for example, was reinforced and secured firmly to the housing.
In an electrically powered vehicle, the low-frequency background noise associated with a combustion engine is missing, which means that high-frequency noises can become more apparent. For this reason, the front- and rear-axle powerpacks on the EQA have been isolated at several points. Components such as the supporting frame at the front axle, the rear-axle subframe and even the rubber bushings were developed in tandem with the digital development phase and continually optimised. These efforts ensure that no irritating noises are perceptible inside the vehicle.
Ancillary components, too, were significantly improved with respect to noise and vibration comfort. The air-conditioning compressor, for example, together with the front powerpack, was isolated from the supporting frame by means of rubber-bonded metal elements. In order to reduce structure-borne sound, the air-conditioning pipes were modified to follow the rigid elements in the bodyshell, and the bearing points isolated as far as possible. In addition, the operating strategy of the air-conditioning compressor avoids engine speeds that could have a detrimental impact on the noise level in the interior. This has no effect on climate comfort.
Low road noise thanks to targeted improvements in rigidity and an ingenious bearing concept
In order to reduce road and tyre noise, the engineers introduced a compact, shear-resistant integral mount which has significantly increased the introductory rigidity at the guide bearing of the front axle. The subframe of the multi-link rear axle is furthermore elastically isolated by rubber bushings. The front subframe connection is integrated into the C-ring structure and therefore has the necessary rigidity for isolation. A cross-member is integrated into the multifunction recess to increase the introductory rigidity of the rear subframe connection.
Low road and tyre noise is an important factor in terms of ride comfort, particularly when driving on country roads. As well as on the configuration of the bodyshell structure and the sound insulation, development work focused on the dynamic transmission characteristics of the various axle components and elastomer bearings. The redesigned front axle subframe allows the connection rigidity for the suspension strut and brake to be significantly increased. Subframe mounts are used in all instances for the rear axle. In conjunction with the reinforcements introduced at the various connection points, this reduces the intrusion of noise. The bearing concept used in the case of the multi-link axle allows greater longitudinal vibration damping, while the dynamic transmission in a vertical direction remains limited.
1Electrical consumption has been determined on the basis of Commission Regulation (EC) 692/2008. The power consumption is dependent upon the vehicle configuration. Further information on the official fuel consumption and the official specific CO₂ emissions of new passenger cars can be found in the "Leitfaden über den Kraftstoffverbrauch, die CO₂-Emissionen und den Stromverbrauch neuer Personenkraftwagen" [Guide on the fuel economy, CO₂ emissions and power consumption of all new passenger cars], which is available free of charge at all sales outlets and from DAT Deutsche Automobil Treuhand GmbH (www.dat.de).
2The WLTP details on the stated vehicles are based on the consumption and CO₂ figures valid in the German market and are to be understood as indicative information. Depending on the chosen equipment, the specific vehicle can lie between the "WLTP Minimum CO₂/Consumption Value" and the "WLTP Maximum CO₂/Consumption Value". A higher figure may apply as the basis for calculating the motor vehicle tax. The stated figures were determined in accordance with the prescribed measuring method. They are "WLTP CO₂ figures" as per Article 2 No. 3 Implementing Regulation (EU) 2017/1153. The consumption figures were calculated based on these figures.
3The WLTP figures for the models listed applicable to the German market can be found at the end of the section. This information can be retrieved on a market-by-market basis from the relevant national Mercedes-Benz websites.
4Electronically limited
5Power consumption and range have been determined on the basis of Regulation (EC) No. 692/2008. Power consumption and range depend on the vehicle configuration.
6The charging times are for a 10-100% full charge at a wallbox or public charging station (AC connection with at least 11 kW, 16 A per phase)
7The charging times are for 10-80% full charge at a DC rapid charging station with a supply voltage of 400 V, current at least 300 A.
8The stated figures are the measured "WLTP CO₂ figures" in accordance with Article 2 No. 3 Implementing Regulation (EU) 2017/1153. Electrical consumption and range were determined on the basis of Commission Regulation (EU) No. 2017/1151. Electrical consumption and range are dependent on the vehicle configuration, and in particular on the selected maximum speed restriction.
9Temperatures just a few degrees above zero which are not perceived as warm.
Suspension
Hallmark Mercedes feature: The EQA is comfortable and agile to drive
As standard the EQA features a comfort suspension with steel springs, and all versions have a multi-link rear suspension. The suspension with Adaptive Damping System (option) offers the driver the possibility of choosing their preferred damping characteristics, thus enhancing their comfort noticeably.
The EQA has a MacPherson front suspension. The wheels are guided by control arms below each wheel centre, the MacPherson struts and two tie rods. The wishbone is forged from aluminium. This reduces the unsprung masses. The steering knuckles are made of cast aluminium.
All EQA models have a sophisticated four-link rear suspension. The three transverse links and one trailing arm at each rear wheel are configured for maximum driving stability, ride comfort and longitudinal/lateral dynamics. The rear axle is mounted on a subframe isolated from the body shell by rubber bushings so that fewer vibrations are transferred from the suspension to the body (see section on "Noise and vibration comfort").
Two suspension variants: optional Adaptive Damping System
The EQA comes as standard with a comfort suspension with steel springs. A suspension with Adaptive Damping System is available as an option. This enables the driver to choose the preferred damping characteristics. A valve in each of the four shock absorbers is electronically actuated to control the oil flow. The damping characteristics are changed by regulation of the oil flow. The Comfort programme comes into its own especially when travelling at low speeds, for example on a cobblestone road.
Several sensors constantly monitor the suspension status, driving situation and driving style of the driver, and adjust the damping at each wheel. They also provide information about the drive system, recuperation and braking system, steering, and the driving assistance systems. The damping is specifically stiffened during acceleration, braking or steering manoeuvres to reduce pitching and body roll, and to improve wheel loads and the ground contact of the tyres.
More traction if desired: 4MATIC all-wheel drive
The more powerful versions of the EQA will be fitted with an additional electric powertrain (eATS) at the rear axle and therefore feature all-wheel drive. The 4MATIC system uses Torque Shift: the distribution of the torque is adjusted 100 times per second as required on a continuously variable basis between the two electric units at the front and rear axles. If the driver does not call for the full output, the motor that is not needed will be completely switched off in order to reduce the base load. In a low load range therefore, the reliance will be on the rear axle with the more efficient, permanently excited synchronous motor (PSM). Higher performance requirements will be met through the additional activation of the asynchronous motor (ASM) on the front axle.
In order to ensure maximum traction and driving stability even on snow and ice, the operating strategy reacts to spinning wheels and adjusts the torque distribution accordingly. Since the two motors are controlled independently of each other, a loss of traction on one axle does not preclude torque being sent to the respective other axle - much as with a conventional central differential lock.
Testing
Gruelling test programme around the globe
During testing of the EQA it was possible, on the one hand, to build on the experience already gained with the other models by the test drivers and engineers at Mercedes-Benz. On the other hand, the electric drive system is new to this platform. Additional tests were used to validate its strengths and durability and ensure that it would meet all customer expectations.
Ever since the automobile was invented by Carl Benz and Gottlieb Daimler, Mercedes-Benz has tested its products thoroughly and at length before bringing them to market. Systematic vehicle testing is one of the most extensive measures undertaken by Mercedes-Benz during the development process in order to guarantee the highest possible vehicle quality. Before going into production, the complete vehicle must reach a maturity level that is defined in detail in advance. Then comes intensive trialling of certain components in test vehicles, e.g. in order to ensure the longevity of a drivetrain network (the combination of – depending on the design - electric drive system, differentials, drive shafts, wheels) and individual axle components.
The most important aspects of EQA testing at a glance:
-
Focus of digital testing: validation of constructive feasibility (can the car, as designed and built, be volume produced?), crash performance (accident simulations for assessing passive safety), aerodynamics, vibration characteristics (NVH), weight, etc., using VR tools
-
Focus of testing on the road and on dynamometers: overall vehicle (how do the previously tested components and assemblies perform when they are integrated into a vehicle?) and long-term durability
-
Ratio of digital testing to real-world testing: 35%/65%
-
Expert knowledge: before being released for production, the vehicle must be tested and validated by numerous experts from many different departments. Overall, several hundred specialists are involved in testing, ranging from the specialist departments, which test and approve their components and modules, through to testing/endurance testing of the complete vehicle.
-
Development period: approx. four years
-
Testing period for complete vehicle: at least two winters and two summers
-
Countries in which the EQA was tested: Germany (in particular at the new testing facility in Immendingen), Austria, Finland, France, Sweden, Spain, Italy, Dubai, South Africa, USA, Mexico, China, Japan
The most recent cold-weather testing of the EQA took place at Arctic Falls, Sweden.
-
Testing extended to the complete vehicle, with the focus on all components and drivetrains.
-
Certain components were validated with respect to all cold weather issues. This involves, for example, adjusting the air conditioning system and driving when the level of friction is low, i.e. in wintery road conditions.
-
There was also an emphasis on preconditioning, charging and battery management at low temperatures.
-
The engineers tested the vehicles on site down to the smallest detail and analysed them in close consultation with the relevant development departments.
At the same time, several 100,000 km are covered with the vehicles in a time lapse in various endurance tests as part of an endurance test run programme that is planned in detail. In a parallel process, cars produced locally in China are tested so that they, too, achieve the high Mercedes-Benz quality standard.
Technical data1
The EQA 250
| Drive system layout | |||
| Drive system layout |
| Front | |
| Front axle | Electric motor type | Asynchronous motor (ASM) | |
| Rated output | kW/hp | 140/190 | |
| Rated torque | Nm | 375 | |
| Front-axle transmission | Type | Single-speed spur gear set | |
| Recuperation performance, max. | kW | approx. 1402 | |
| Battery | |||
| Type |
| Lithium-ion | |
| Number of cells |
| 200 | |
| Number of modules |
| 5 modules | |
| Rated voltage | Volts | 367 | |
| Capacity (usable) | kWh | 66.5 | |
| On-board charger (AC) | kW | 11 | |
| Charging time at a Wallbox (10-100%)3 | h | 6:25 | |
| DC charging (max) | kW | 100 | |
| Charging time with rapid charging (10-80% SoC)4 | min | 30 | |
| Suspension | |||
| Front axle | MacPherson suspension with spring strut and transverse control arm, coil springs, twin-tube gas-filled shock absorbers, stabiliser bar | ||
| Rear axle | Multi-link, coil springs, gas-pressure shock absorbers, stabiliser | ||
| Brake system | Vented disc brakes at the front, electric parking brake, ABS, Brake Assist, ESP® | ||
| Steering | Electrically assisted rack-and-pinion power steering system | ||
| Wheels | 7.5 J x 18 H2 | ||
| Tyres | 235/55 R 18 | ||
| Dimensions and weights | |||
| Wheelbase | mm | 2729 | |
| Front/rear track | mm | 1585/1584 | |
| Length/width/height | mm | 4463/1834/1620 | |
| Turning circle | m | 11.4 | |
| Boot capacity, VDA | Litres | 340-1320 | |
| Kerb weight acc. to EC | kg | 2040 | |
| Payload | kg | 430 | |
| GVWR | kg | 2470 | |
| Performance, consumption, emissions | |||
| Acceleration 0-100 km/h | Seconds | 8.9 | |
| Top speed | km/h | 160 | |
| Range (NEDC)5 | km | 486 | |
| Combined fuel consumption (NEDC)5 | kWh/100 km | 15,7 | |
|
|
|
|
|
The following WLTP details on the stated vehicle are based on the consumption and CO₂ figures valid in the German market and are to be understood as indicative information.
Depending on the chosen equipment, the specific vehicle can lie between the "WLTP Minimum CO₂/Consumption Value" and the "WLTP Maximum CO₂/Consumption Value".
A higher figure may apply as the basis for calculating the motor vehicle tax.
|
| WLTP CO₂ emissions combined, max./min. (g/km)6 | WLTP combined electrical consumption, max./min. | Electric range total (km)1 |
| EQA 250 | 0 | 17.7 | 426 |
1The WLTP figures for the models listed applicable to the German market can be found at the end of the section. This information can be retrieved on a market-by-market basis from the relevant national Mercedes-Benz websites.
2At the wheel, dependent on vehicle weight
3The charging time is for a 10-100% full charge at a wallbox or public charging station (AC connection with at least 11 kW, 16 A per phase)
4The charging time is for a 10-80% full charge at a DC rapid-charging station with a supply voltage of 400 V, current at least 300 A.
5Power consumption and range have been determined on the basis of Regulation (EC) No. 692/2008. Power consumption and range depend on the vehicle configuration.
6The stated figures are the measured "WLTP CO₂ figures" in accordance with Article 2 No. 3 Implementing Regulation (EU) 2017/1153. Electrical consumption and range were determined on the basis of Commission Regulation (EU) No. 2017/1151. Electrical consumption and range are dependent on the vehicle configuration, and in particular on the selected maximum speed restriction.
Pictures 14
Documents 5
- 36 Pages
- 649.8 KB
- 36 Pages
- 627.4 KB
- 37 Pages
- 663.4 KB
- 37 Pages
- 632.1 KB
- 40 Pages
- 642.2 KB